neil brown Posted June 12, 2020 Report Share Posted June 12, 2020 Hi simon or admins just picked up an ecu listed above can you tell me from serial number any history on it serial number #8774 with base board v1.1 and top board rev 1.2 thanks Neil Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 12, 2020 Report Share Posted June 12, 2020 I cant tell you any service history (if there is any) as I dont have access to those records at the moment, but 8774 would be an early G4 storm or Vipec V44 series based plug-in ecu, not a G4+. Quote Link to comment Share on other sites More sharing options...
neil brown Posted June 13, 2020 Author Report Share Posted June 13, 2020 Spoke to seller and he stated it’s a g4+ if it’s a g4 is there a manual for the pin outs Quote Link to comment Share on other sites More sharing options...
neil brown Posted June 13, 2020 Author Report Share Posted June 13, 2020 Looking thro the pins outs on where they are on the header have noticed the following not listed aux output 5 aux output 7 are these available be used also can the original link display be used with this ecu on the rs232 output on the board Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 13, 2020 Report Share Posted June 13, 2020 I merged your two threads into one. The pinout in the help file shows all IO that is connected. Aux 5 & 7 arent available. Yes the displaylink will work over serial. Quote Link to comment Share on other sites More sharing options...
neil brown Posted June 14, 2020 Author Report Share Posted June 14, 2020 Adam what connector do I require for the display link cable Also if i change from storm wire in to plug in unit and calibrate TPS and map once map is transferred over is that all I need to do Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.