Fotis Posted June 17, 2020 Report Share Posted June 17, 2020 Hi everyone, Working on a telemetry module project to make a link ecu communicate wirelessly with the laptop, i would like to know the pinout of the circular connector of the link ecu if that's possible? Rx, Tx, 0v ,5v etc. Kind Regards Fotis Quote Link to comment Share on other sites More sharing options...
Vaughan Posted June 17, 2020 Report Share Posted June 17, 2020 straight from the help manual That's actually just the bottom board CAN plugs sorry, should be: Pin 1 = USB Ground Pin 2 = nc Pin 3 = USB P Pin 4 = USB N Pin 5 = USB +5V Pin 6 = nc with the pin numbering being for the round plug Quote Link to comment Share on other sites More sharing options...
Fotis Posted June 19, 2020 Author Report Share Posted June 19, 2020 Thank you Quote Link to comment Share on other sites More sharing options...
Graham Posted November 3, 2021 Report Share Posted November 3, 2021 Hi Fotis How is your wireless telemetry project going? I'm keen to do something similar so it would be great to work together rather than both reinvent the wheel. Ar eyou interested to share or work together on this? Cheers Graham Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 3, 2021 Report Share Posted November 3, 2021 G4X doesnt output serial data, you will need to use CAN. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.