Jump to content
Sign in to follow this  
nabera

1991 Toyota MR2 ST185

Recommended Posts

Hey everyone, just wanted to create this topic as way to kind of track my progress on getting a Link ECU (TST185+) installed on my MR2. 

I purchased the PlugIn ECU however I will be running a full custom harness and lots of changes to the stock configuration. This is just sort of a fun side project so it will be a learning opportunity as well. I am probably in over my head but I work slow and methodical so I think I can work through and learn what I need. Anyways I just got the ECU and while I wait for the machine shop to finish up the engine I am going to start planning the harness. The plan is to leave anything that doesn't directly involve running the engine alone and basically have a dedicated engine harness. Why I chose the PlugIn? Well I like the idea of keeping things as OEM looking as possible. Although I will be adding a lot of things like a COP set up and removing the distributor for a CAS, the idea is to make these things look as OEM as possible. It seems the PlugIn ECU provides more than enough I/O for what I need, but I'll just need to significantly change the configuration.

Here are sort of the major changes or additions to the OEM set up:

  1. TST185+ ECU 
  2. DW Injectors (820cc) (18U-00-0078-4)
  3. Denso COPs (6731300)
  4. Hall Cam & Crank sensors (Racer X)
  5. Link 3bar MAP
  6. Link 3 way Boost Solenoid
  7. GM IAT (3/8 NPT) w/ KO Racing Cold Start Injector Adapter Plage
  8. Walbro FP
  9. Remove EGR
  10. Remove Fuel Pump resistor
  11. Remove OEM o2
  12. Remove AFM

 

There are still a lot of unknowns for me. I will probably ask a lot of noob questions after thorough research. Here to learn.

My goals for the car are stockish power. Not looking to run more than 1 bar of boost on a CT27. I have a ton of supporting mods such as:

  1. 4" Intake (Racer X)
  2. 3" Downpipe (Berk)
  3. 3" Exhaust (Berk)
  4. Upgraded IC Core and Piping (TCS)
  5. CT27 (ATS)
  6. Rebuilt Engine*

The rebuilt engine is in progress. I picked up a JDM 3SGTE with a spun rod that had JE pistons. The machine shop is checking it over and will advise what is salvageable. I have the stock GEN2 3SGTE that the car came with I will use as a fall back. 

 

 

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...