Stillrolla Posted July 2, 2020 Report Share Posted July 2, 2020 Is there a way to allow the knock threshold to be raised when switching over to a high cam. The 2zz-ge is pretty noise heavy when switching over. sometimes it registers as knock, would i have to mess with window start ? would be nice if there was a High-cam windowing when activated. Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 2, 2020 Report Share Posted July 2, 2020 Put your cam aux status on one axis of the knock target table. In my experience the 2ZZ is very prone to knock on the low cam but not really needed on the high cam. Stillrolla 1 Quote Link to comment Share on other sites More sharing options...
Stillrolla Posted July 2, 2020 Author Report Share Posted July 2, 2020 8 hours ago, Adamw said: Put your cam aux status on one axis of the knock target table. In my experience the 2ZZ is very prone to knock on the low cam but not really needed on the high cam. Thanks! ill give that a try Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.