Jump to content

Is G4X closed loop lambda suitable for WOT?


bradsm87

Recommended Posts

Is CLL in "Auto Mode (Wideband)" suitable for full load operation? There are lockout settings that are set up to lock it out at full load but do I have to lock it out? Many factory and aftermarket ECUs work well with closed loop wideband under all load conditions including WOT.

Link to comment
Share on other sites

No problem, just set tps lockout to max (110%) and Map lockout to something like 500kpa. 

I recommend to use link can lambda or internal on Furry and Thunder ECU, because they can dectwct wrong sensor which sets CL lambda to openloop. 

On analog lambda it could be possible that a wrong sensor leans mixture out.

 

 

Link to comment
Share on other sites

On 7/4/2020 at 8:19 AM, mapper said:

On analog lambda it could be possible that a wrong sensor leans mixture out.

On the G4X if the Lambda value is above 9 or below 0.1 CLL will not run.

Also a map or tps delta value of 0 means no map or tps delta lockout.

On 7/4/2020 at 8:19 AM, mapper said:

just set tps lockout to max (110%)

Max tps lockout value is 0 but the tps value has to be greater than this value to hit the lockout and tps cannot be greater than 100%.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...