Teatreeboi Posted August 12, 2020 Report Share Posted August 12, 2020 Hi , I recently acquired a link g4 PNP for Mazda Rx7 93 single turbo (Rhd) I know the ECU works I’ve seen it with my own eyes drive on a similar setup on another car. now , I installed the ecu in my car and connect the ECU-USB cable , Aswell as download the latest link software, made sure the driver (Com3) was installed BUT it still won’t work... it says: it detected the USB but no power to the ECU , i made sure the 4 connector are plugged in the back of the ecu . (ps) I removed my EGI fuse because fuel is pouring everywhere. Thank you Quote Link to comment Share on other sites More sharing options...
Teatreeboi Posted August 12, 2020 Author Report Share Posted August 12, 2020 Nvm , I found my problem , it was the EGI fuse ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.