Jump to content

Link identify help needed


Gameiruz

Recommended Posts

The ECU is a LEM V5, so the last of the G1's which was PC tunable and had an extra 4 pin socket with a couple of extra inputs over the older versions.

The sub board (trigger decoder) I have cant personally identify - @Simon may be able to on Monday.  It appears to have the electronics on board for 2 x opto/hall sensors of an odd pattern so my guess is it probably matches the "Mitsi V6" label.  Probably 6G72 which had 3 teeth on crank and 4 teeth on cam (or equivalent in a CAS).   

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...