Jump to content

Bosch temp/pressure sensor calibration


Recommended Posts

Correct, 0261230340 is one of the OEM numbers or PST-F1 is the Bosch motorsport number.

And yes thread is M10 x 1.0.  I have heard some guys say it will usually screw into 1/8NPT ok but havent personally tried.

Link to post
Share on other sites

On a related note - has anyone had any trouble with the little crimp pins that go into the supplied 5 pin connector? The connector kit I bought has 5 pins in it. I have already ruined one trying to crimp it (with a non-insulated terminal crimping tool), and I can't find where to buy any more pins. 

Link to post
Share on other sites

Yeah they are not the nicest connectors to work with for sure.  I typically use a 3303 64CT for most of the small sealed terminals.

Where in the world are you?  Research suggests there maybe a couple of other series terminals that are easier to get that will fit these housings - provided they are the bosch ones and not a Chinese copy which could use anything.

Once I know where you are I will see if I can make a suggestion.  

Link to post
Share on other sites

I've found a couple of resources that suggest the TE MCON 1.2 terminals should fit these, im not 100% confident though.

The most common part numbers that you will find locally at Mouser or Element 14 etc are 7-1452668-1 or 7-1452668-3.  Search those numbers, download a datasheet and measure/compare to yours.

Link to post
Share on other sites
  • 2 weeks later...

Ok I just started the car since installing the new Bosch temp/pressure sensor 

 

temp works perfectly, 

Ecu showing - fault code 32 ANV8 “below error low value”

(Pressure is connected to ANV8)


ANV8 - error low value is 0

seems like whenever it’s reading 0 then the error low value  comes up ?


I will post a log and my tune file if someone could please have a look

 

once I clear error fault codes error goes away until car is turned off and back on

 

thanks 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...