Jump to content

Plex SDM 500 - Display & Logger will it work on a G4+ ?


Recommended Posts

Hey Guys,

Looking at getting my self a Plex SDM 500 - Display & Logger..

Couple of newbie questions will it work with the G4+ - anyone else running one?

Also what connector do I need to connect the Plex can-bus to the Links can-bus so I can plug it in Links ecu (photo attached for reference)

 

Thank you in advance 

 

Capte.JPG

Link to post
Share on other sites

Yes they will work out of the box using the generic dash stream - or the Plex CAN is fully customisable if you want to send something that isnt in the standard stream.  

To connect to the plug-in CAN port you will want a CANPCB cable and a CANF plug.

36PW8G2.png

Link to post
Share on other sites
2 hours ago, Adamw said:

Yes they will work out of the box using the generic dash stream - or the Plex CAN is fully customisable if you want to send something that isnt in the standard stream.  

To connect to the plug-in CAN port you will want a CANPCB cable and a CANF plug.

36PW8G2.png

Thank you @Adamw really appreciate your help :) Thank you

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...