bsh Posted September 26, 2020 Report Share Posted September 26, 2020 Hi! I cant figure to get the fans working... Regarding the manual, fan control are via CAN. I have setup CAN 2 as 350Z/G35 and have fan 1 and 2 setup as virtual aux 2 and 3. Under runtime values, virtual 2 and 3 are green and active, but fans arent running. I must have missed something, any ideas? It seems like tacho are via CAN as well, and tacho are working. Thanks Nissan 350Z.pclx Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 26, 2020 Report Share Posted September 26, 2020 Are you on the latest firmware 6.18.*? I know there was some recent changes to virtual aux fans so at least in recent firmwares it should work how you you have it set up. In firmware priror to 6.17 you had to have an actual aux output assigned for it to work correctly. Please let me know if you are on recent firmware and it still doesnt work, I will do a bit more testing later tonight. Quote Link to comment Share on other sites More sharing options...
bsh Posted September 26, 2020 Author Report Share Posted September 26, 2020 Thanks, I am on 6.1627. Will try with update tomorrow:) Quote Link to comment Share on other sites More sharing options...
bsh Posted September 27, 2020 Author Report Share Posted September 27, 2020 Worked perfect with new firmware:) New firmware seems to cure ABS-light as well due faster CAN startup:) Thanks:) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.