Jump to content

BMW E36 M50B25 ( Non Vanos ) Vipec V88 First Step


DRM-001

Recommended Posts

Good Day For Everyone....

am first starting my Project.. have finished built engine..

i have Vipec V88 ( Used ECU ) i have made adapter  ( for Stock engine wiring ) 

i need help 

for Base map...

also im using Stock BOSCH Cam And Cranck Sensors...

how i can get it does anyone can help me?

 

 

Thanks and best wishes fo you all

Link to comment
Share on other sites

2 hours ago, Adamw said:

There is a E36 base map in the VTS software, it is for the vanos M50 engine but it will be a good starting point for your car.

Thanks for the replay... but some people says to me i will be unable to start engine With BOSCH sensors and i must buy and install an simens.. is it right or its wrong info? 

 

 

also when i try to see trigger setup it giving me choice for M52/S50

 

here is not an M50 BOSCH sensors ... 

 

image.thumb.png.b33c08223382fe39732c033fdff344b8.png

Link to comment
Share on other sites

10 hours ago, DRM-001 said:

Thanks for the replay... but some people says to me i will be unable to start engine With BOSCH sensors and i must buy and install an simens.. is it right or its wrong info? 

The M50 bosch sensors should be fine.  As far as I know only the M52 and S52 with seimens ECU has a weird cam sensor that doesnt work.  

Link to comment
Share on other sites

  • 4 months later...

Hello Everyone..

I have an e36 1992 years..

M50B25 Engine..

With BOSCH Crank/Camshaft standart  Sensors for this engine 

ON Stock ECU 402/403 it runs good..

p.s if its needed

crankshaft sensor part number is 12141726065

camshaft sensor part number is 12141726590

i have made adapter  for vipec v88

iam unable to start engine...

it seens rpm

crank camsaft trigers says yes

but not feeting a fuel ( as i think ) 

and also i think injector is not working..

i have tested voltage and its working...

i dont know why but i think camshaft sensor is not working and engine not starting becouse if that..

there is an LOG file and also map file  ( this is not working map this is for just to i can start engine and go to tunner )

please tell me what is wrong here ...

 

 

 

Log 7-03-21 4;56;24 pm.llg E36V2.pcl

E36V2.pcl Log 7-03-21 4;56;24 pm.llg

Link to comment
Share on other sites

9 hours ago, Adamw said:

Pretty sure the non-vanos M50 has a reluctor on the cam and sync mode should be set to cam pulse 1X.

Thanks will try but... 

no base map for e36 works also.. on this map i will make changes as you say .. 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...