BackyardBuild Posted June 2, 2012 Report Share Posted June 2, 2012 Slowly getting tuned up. I am trying to set up the ISC. It seems that the ISC needs something (RPM target) to reference in order to try and control the idle. I have been studying the manual and can't seem to find anything about a ISC reference RPM. How is the ISC controlled if there is no reference? I have a 2 wire ISC and could use some help on setting this up. I will use the ISC for cold start as well as the AC idle up and other electrical loads. Quote Link to comment Share on other sites More sharing options...
Simon Posted June 7, 2012 Report Share Posted June 7, 2012 This will depend on the ISC mode you are running. In open loop mode no RPM reference is required. Attached is a sample map off a V7 Subaru with the idle speed configured for a solenoid application.Subaru V7.zip Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.