Jump to content

Setup Nos controll more advanced?


Guest |427|

Recommended Posts

Guest |427|

I have some problems setting up my Nos controll.

There is no "nitrous" option for the Aux outputs so I guess I'll need to stick with GP output.

Guess i'm gonna be using the virtual AUX options to do this:

I would the nos to be actived by a switch (di#4)

I will run a dry system and add fuel via the 4d fuel table.

Maybe i'll pull some timing via the 4d ignition table

I got full boost @ 6000rpm (revlimit 9000) so i would like the nos to be used betwee 5500-8900rpm

I don't won't the nos to be activated while using launch controll, gearcut or while being at the revlimit

I also only want it to be activated when TP above 90% and MAP above 140kpa

How will i setup this the best?

Link to comment
Share on other sites

You will need to use a GP output.

Two conditions will be the RPM low and high. The third will be a virtual aux (giving three more conditions)

These could be set as DI4, Throttle position and "Engine Limits"

There will be a bit of thinking involved about making sure that all the conditions and polarities are correct.

The engine limits flags should cover gear cut, launch control and rev limit.

If you set this all up to how you would like I can run on the bench to test it all if you email the file.

Link to comment
Share on other sites

From your suggestion of

"

Activation switch for NoS: Di-4

NoS Solendoid hooked up via Relay on Aux o/p 6

Conditions for nos

Virtual Aux#1 must be on

(RPM 5500-8700)

Gear 2 or above.

Virtual Aux#2 must be off

(virt-aux#2 is only on when Engine limits is 1 (on=gearcut, launch or revlimit)

Virtual Aux#3 must be on

Tp is above 90% "

Testing this on the bench it all works spot on.

Some clever thinking on your part there.

boost is above 0.3bar

Di#4 switch is on

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...