Jump to content

XH falcon ute


Barra58

Recommended Posts

G'day all, just got my V88 last Tuesday, many thanks to Mark from Godzilla Motorsport, AWESOME service. anyway its going to power a 4.0l dohc barra motor with a few goodies from Atomic, Camtech, Spool and later on Garret, which will be going into a 99 XH falcon ute. :D

Link to comment
Share on other sites

Good luck with your project.

I have installed a V88 on a BA XR6T, with full Atomic setup.

I am also controlling the factory DBW with the V88.

I have done a street tune on it and will be tuning it on the dyno this weekend.

Aiming for around 800 HP at the wheels for now, final target will be around 1000 at the wheels on race gas.

Link to comment
Share on other sites

Good luck with your project.

I have installed a V88 on a BA XR6T, with full Atomic setup.

I am also controlling the factory DBW with the V88.

I have done a street tune on it and will be tuning it on the dyno this weekend.

Aiming for around 800 HP at the wheels for now, final target will be around 1000 at the wheels on race gas.

Sounds awesome, I'll be hooking up the DBW as well, also the vct. You got a thread on it? if not keep us posted here. I read the 1 you did on the 5.4l ford, that was pretty much my decider for the V88, this is the 1st ecu transplant for me, previously just modified existing ecu's with J3 chips.

Link to comment
Share on other sites

  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...