autofix Posted December 27, 2012 Report Share Posted December 27, 2012 What for used Digital input "Brake switch NC" or "Brake switch NO" and for what function we may use it? Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted December 27, 2012 Report Share Posted December 27, 2012 Digital Input Brake Switch NC (normally closed contact) Digital Input Brake Switch NO (normally open contact). These are both refering to the state of the brake switch in it's INACTIVE STATE, IE: Brake pedal not depressed. The use of this function is really only limited by ones imagination. EG: With foot depressed on brake pedal, setup correctly using a general purpose output, with multiple switch conditions, You could control a Nitrous System to be active at the lights to help build boost for launch at the drags. Or control a Trans Brake in an auto trans, activate intercooler spray bar setup, the list goes on. Regards Dave. davidbek95 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.