Fodder Posted June 29, 2014 Report Share Posted June 29, 2014 With the latest software release (5.1.0.2009) there is a Fahrenheit display error in the hysteresis. It is displaying absolute temperature instead of the relative temperature. In other words, if you set the hysteresis to 2C and then switch to Imperial, the software reports 36F. It should display 3.6F. Another example is setting the hysteresis to 10C and then switching to Imperial, which then reads 50F. It should show about 18F. I haven’t had a chance to test the effects of this, but would assume it’s simply a conversion problem, not a functional problem? Ron Quote Link to comment Share on other sites More sharing options...
Simon Posted June 30, 2014 Report Share Posted June 30, 2014 Hi Ron Yep display issue only the switching is mint just displays odd figures. Will get it on the list to be fixed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.