Jump to content
Sign in to follow this  
Sutkale

A warning message while connecting PC

Recommended Posts

Guys,

I installed the latest firmware and software to my i88. Once the ECU connection is established, there´s a warning message screen that "Value out of bounds" and showing that different values (in each warning screen) like Fuel blend, Quick tune AFR X-axis, cam position blaa, blaa, etc. I get rid of them by tapping "Ignore" on each screen. How to get rid of this? Very annoying. :twisted: There´s nothing wrong with the settings as such.

Share this post


Link to post
Share on other sites

Hi,

because it is a new operating system as such, new firmware with new parameters etc, you need to let the ECU know whether to ignore that input or to have you set it to it's correct calibration.

This is why it is important to read the UPDATE notes when you install the new software/firmware.

There will more than likely be new functions you do not know about because you haven't read the update.

Believe me, there are some very important bits of information in the current 5.1.0 software/firmware, that can have huge consequences as to how well your engine will or can run etc.

Regards

Dave.

Share this post


Link to post
Share on other sites
Hi,

because it is a new operating system as such, new firmware with new parameters etc, you need to let the ECU know whether to ignore that input or to have you set it to it's correct calibration.

This is why it is important to read the UPDATE notes when you install the new software/firmware.

There will more than likely be new functions you do not know about because you haven't read the update.

Believe me, there are some very important bits of information in the current 5.1.0 software/firmware, that can have huge consequences as to how well your engine will or can run etc.

Regards

Dave.

Thanks Dave,

I´ve noticed new functions and made changes accordingly like the ones under Fule main tab. It´s a bit unclear to me if the firmware changes have an affect to trigger since I started to get trigger errors. I´ll take some time to read the update notes and make required changes. Is the update notes available as such since I could read them elsewhere than in car while making new update to firmware?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...