Jump to content
Sign in to follow this  
Heath

Earth wires

Recommended Posts

Hi, new to using the Link systems and are doing a G4 xtreme install. In the manual it's very specific about power grounds and sensor grounds. Unless I'm missing something the black earth wires are not labeled sensor or power ground on the harness. Only ref to sensor ground is feeding earth to the sensor itself. Any help would be great 

Cheers

Share this post


Link to post
Share on other sites

Hi Heath,

The sensor ground are used for sensors like MAP or TPS. The ECU also requires earths for its operation, these are the power grounds. If you download and install PCLink, and head to Help > Wiring information > Xtreme Header Pinout you will find which pins are Sensor Ground. The pins on the diagram labelled Ground are for the power grounds and should be connected directly to earth.

Hope this helps,

Scott

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...