Jump to content
Sign in to follow this  
chris parnham

afr target table / quicktune

Recommended Posts

ive had the link g3 fitted on one of our cars for a while now ,i had a spare wideband controller so decided to fit this to it .its gone on fine and shows the afr's perfect but now ive been looking at the quicktune function and have issues 

when you open the function the 'target' afr isnt reading anything the 'actual' is reading great 

when you look at the target table the rpm goes from 0-65000 on the first box and finishes at 100000rpm how can i change the scale ? 

is the anything i could have set incorrect ,many thanks chris 

Share this post


Link to post
Share on other sites

Hi Chris

You will need to go in to the Fuel menu and then right at the bottom is the AFR target table configuration.

You will need to set these to more normal values.

The one that is likely to be out of wack is the Table Increments this should be set to 500ish

Share this post


Link to post
Share on other sites

It might be you are on an early firmware version. If you go to the help menu and click on ECU information you will find a firmware version. We want to be on 1.9.2 as the latest version.

Note if you are currently on a early version going to a newer version will require a recheck of all settings.

Share this post


Link to post
Share on other sites

Your sensor will be the 7bar option most likely, if you thought it was 5 bar.

You will soon know if you have selected the incorrect one as it will not read close to 100kpa when engine is not running.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...