impellerhead Posted September 22, 2010 Report Share Posted September 22, 2010 On the G4 SIlver Extreme, can I wire 2 low impedance injectors to 1 drive in peak&hold mode? Quote Link to comment Share on other sites More sharing options...
Jurgen Biggelaar Posted September 23, 2010 Report Share Posted September 23, 2010 Hi Fredde. This should be no problem at all, as long as they are not too lower impedance. 1-2ohm injectors would not be suitable for operation like this as they will draw far too much current. If your 'pair' of injectors tries to pull more the 8A peak or 1.5 A hold total current, on the one injector drive; it is likely that you will end up with poor performance from the injectors and is not recommended. Jurgen Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.