zach olsson Posted June 1, 2012 Report Share Posted June 1, 2012 how do i set a bangy consistant limitr at the moment mine is on 100% ignition cut and it does approximatly 3-4 limits lets the car go again thn repeats http://www.youtube.com/watch?v=3qz3r0P2-qg dnt no if you can fully hear it in this  http://www.youtube.com/watch?v=Igh0MN3LND4&feature=channel&list=UL this is my mates old link rpm limit Quote Link to comment Share on other sites More sharing options...
Scott Posted June 4, 2012 Report Share Posted June 4, 2012 Hi Zach, A couple of things you could try: 1) Reduce your control range. 2) Try reducing your ignition cut from 100%. If you want it to stay on the limiting, you want it so that the RPM doesn't climb, but only drops slowly. Start at somewhere around 95% and then slowly drop the % until the RPM starts breaking through the limit. Cheers, Scott. Quote Link to comment Share on other sites More sharing options...
zach olsson Posted June 6, 2012 Author Report Share Posted June 6, 2012 howsit from memory i think the control range was 200 the limitr was set up under the advanced limitr settings 100% ignition cut and set 2 adaptive there was a thing on linkecu website about advance limitr setings and it was set up prety simula 2 that  Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.