Alan Gerrard Posted April 22, 2015 Report Share Posted April 22, 2015 Hi, I have a question with how the Anti-lag solenoid operates, If Anti-lag is activated and it's configured to use an "Anti-lag solenoid" is the solenoid permanently ON while Anti-lag is activated ? The reason for this question is on Evo's 4-9 there is a system called SAS "secondary air system" where air is passed from the IC piping into the exhaust manifold which is activated via a solenoid, This can only be activated while on decel and was installed from factory for Anti-lag in rally use as I understand. So my question is can I activate this solenoid via "Anti-lag solenoid"  OR should I use a GP table and set the conditions that are required ?  Thanks Alan Quote Link to comment Share on other sites More sharing options...
Simon Posted April 23, 2015 Report Share Posted April 23, 2015 Using a GP out put would be the go in this case. As you are correct that the air bypass would be on all the time while anti lag is active. Quote Link to comment Share on other sites More sharing options...
Alan Gerrard Posted April 23, 2015 Author Report Share Posted April 23, 2015 Thanks for reply, I shall use a GP out put then. P.s I have received my Fury ecu, when will the manual for it be uploaded to your website ? Â Cheers Alan Quote Link to comment Share on other sites More sharing options...
Simon Posted April 23, 2015 Report Share Posted April 23, 2015 You can find it in the PCLink help file with version 5.4.0PCLink Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.