Peter Snowdon Posted July 4, 2009 Report Share Posted July 4, 2009 Hi, can you help with a problem on my Rover3.5 running v2 linkplus, I tried connecting the existing rover 12volt 2 wire speed pickup wire to the link digital input 2 and set input to falling edge, this caused the rover speedo to become erratic . Do I need to manufacture a signal conditioner? or is there another way of connecting? Cheers for your help. Peter. Quote Link to comment Share on other sites More sharing options...
Simon Posted July 7, 2009 Report Share Posted July 7, 2009 If you are sharing an input just make sure you have the pullup turned off on the DI. If its still not happy then you will need to have a look at how the signal is being effected. Quote Link to comment Share on other sites More sharing options...
Peter Snowdon Posted August 10, 2009 Author Report Share Posted August 10, 2009 Hi Simon, I ended up going with DI3 with 1k in series to get the right results thanks . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.