Connor McGill Posted June 5, 2015 Report Share Posted June 5, 2015 Hi there, I recently purchased some Autometer digital stepper motor gauges.With my Link G4+ I was intending to use temperature and oil pressure engine limiters.If I were to splice the sensor signal wire and run it to both the ECU 0-5V inputs and the Gauges in parallel, would the 0-5v signal still read accurately to the ECU and gauges? Or am I better off running a second oil pressure sensor, and second water temp sensor specifically for the ECU? Â Quote Link to comment Share on other sites More sharing options...
Simon Posted June 5, 2015 Report Share Posted June 5, 2015 Yes that should work fine. As the ECU connection should have no impact on the gauge readings Quote Link to comment Share on other sites More sharing options...
Dora Wieland Posted June 11, 2015 Report Share Posted June 11, 2015 I*ve done the same with an Auber Oil Pressure Gauge. Only thing I had to do ist to connect AnVolt and also Sensor Ground to the Link +5V comes from the Gauge  Works perfect  Regards Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.