Mathew headifen Posted July 11, 2012 Report Share Posted July 11, 2012 Hi all Im currently in the build of a SR20de+t  and my mate offered me his old link G1 as an ecu rather than a chip n tune.  His G1 was in his RB30det before he went to a G4, question is will it plug straight in to the SR loom or will i need a harness adaptor? Quote Link to comment Share on other sites More sharing options...
Scott Posted July 13, 2012 Report Share Posted July 13, 2012 Hi Mathew, Did it plug straight into your mates RB30? You should be able to look at the connectors on the ECU and see if it will physically connect. Here is the link to the documentation page for the G1 ECUs: http://www.linkecu.com/support/documentation/g1-engine-management-documentation If you can identify which ECU you have, one of those manuals will be helpful. Scott Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.