Peter Ratcliffe Posted November 27, 2009 Report Share Posted November 27, 2009 Have motor running but not getting full power Timming set at 6% and trigger offset set at -21 Motor runs fine but when you increse throttle timming light retards is this wright ore have i got it set wrong peter ratcliffe Quote Link to comment Share on other sites More sharing options...
Simon Posted December 8, 2009 Report Share Posted December 8, 2009 Hi Peter What ECU is this on? First area to check will be that you have the correct ignition configuration. Paying close attention to the Dwell or spark edge setting. You will of course have to tune all fuel and ignition figures as well. Quote Link to comment Share on other sites More sharing options...
Peter Ratcliffe Posted December 8, 2009 Author Report Share Posted December 8, 2009 Hi Simon we have a G3 ecu we have got it advancing the wright way now and started to set fuel and ignition motor runs good up to 4500rpm then starts to die Timming advances out to 38 at 4800rpm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.