Jump to content

No Start, With RPM Reading


Incognito G

Recommended Posts

Help! I just installed by G4 Storm, I am getting an RPM reading of 0 to 200 but the logs and the ECU Tuning screen say that AF1 though AF4 and AI1 through AI4 are Not Selected. Setup is as follows: FUEL 1) Injection Mode - Sequential with Injectors wire to each Brown/Combination Wire 2) Fuel Equation = Map 3) AFR = Off 4) Master at 5ms 5) Injector Test is OFF 6) All other settings are OFF IGNITION 1) Ignition Mode = Direct Spark with Individual coils wire to each Blue/Combination Wire 2) Dwell Edge = Rising 3) Ignition Delay = 200us 4) Spark Duration = 2ms 5) Ignition Test is OFF TRIGGERS 1) Trigger = Evo 1-6 2) Trigger 1 Type = Optical/Hall wired to the CAS 3) Trigger 2 Type = Optical/Hall wired to the CAM 4) Calibrate Trigger Offset = 0 Attached is a log. Badly need help. I've been tuning other ECU's but first time I could not make a car start.

log3.txt

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...