Jump to content
Sign in to follow this  
Ian Johnson

G1 v3 lem wire-in pc compatable?

Recommended Posts

Hi Ian,

You're correct about v4 and above being PC tunable. Although using a COMLink or SerialLink a v3 can send raw data to 'COMLink' a terminal program that comes with PCLink 2.5. This will display all data including map values to your PC. If you actually wanted to log the data and play it back you will need an upgrade to v5.

-Cameron

Share this post


Link to post
Share on other sites

Thanks Cameron ,I had a look at the PCLink 2.5 but couldn't see 'COMLink' terminal program? I'm presently using Winlog program with my WBo2 and the rpm signal, and TPS from the V3 LEM. I'm just trying to get the raw map signal so I can plot all four. Could I do this then if I buy a serialLink? or can I piggyback a pin from the flat ribbon to log to Winlog program? Cheers Ian.

Share this post


Link to post
Share on other sites

COMLink.exe should just be in the PCLink2_5 install folder, it's a separate file. The MAP signal doesn't run on the ribbon cable, it's a constant datastream of all the info available. You could either attach directly to the MAP sensor internally as long as your logger doesn't modify the signal. Or you could add an extra MAP sensor tee'd off your MAP line and read the signal from that through the same system as the TPS/WB etc.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...