Jump to content
Sign in to follow this  
adam hrachowina

gear calibration

Recommended Posts

Hi, im having problems getting the G3 to enter calibration, its a ver 1 impreza with cable speedo drive,jap clocks originally in kph but fitted with mph overlay and cable converter,it has settings stored from previous 5 speed box ,this was calibrated before the converter was fitted. i now how have 6 speed fitted but when i try to enter calibration driving in 1st it says no speed input through the rpm range, the ecu displays the speed input in runtime values and defines the previously stored gear positions when changing gear, also the setting for speed display in ecu is selected to display in mph but it still shows it as kph in run time values,when showing 30kph it is actually reading 30mph on the clocks, any ideas?

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Create New...