Matt Barker Posted April 6, 2010 Report Share Posted April 6, 2010 I have a legacy running a storm wire in with a ej20 single turbo setup. After a road tune I have done about 500'ks then a funny problem has come up. It cuts under load, its like a revcut or boost cut. after some testing it appears to occur just before 5PSI is hit, if I back off the throttle i can get it to rev higher but when the load goes on it cuts. I have replaced the plugs and coil packs. I turned off the map cut and rev cuts and it still happens, seams to be happening just over 3000 rpm. Quote Link to comment Share on other sites More sharing options...
martin battye Posted April 6, 2010 Report Share Posted April 6, 2010 post your pcl file Quote Link to comment Share on other sites More sharing options...
Matt Barker Posted April 7, 2010 Author Report Share Posted April 7, 2010 here ya go Quote Link to comment Share on other sites More sharing options...
Matt Barker Posted April 7, 2010 Author Report Share Posted April 7, 2010 . Quote Link to comment Share on other sites More sharing options...
martin battye Posted April 11, 2010 Report Share Posted April 11, 2010 try this... and take a log for me and post it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.