Guest Dave-Kriedeman Posted June 28, 2008 Report Share Posted June 28, 2008 Hi Ray, was wondering if the PNP boards were ready yet. Darren should be back next week. He was pretty keen for the board after i spoke to him. He also wanted some bigger injectors. His R32 GTR should be a good test mule. Made 450 hp at all 4 corners (apparantly) with the Power fc. Do you think he should ditch the Mass Air Sensors ? Dave. Quote Link to comment Share on other sites More sharing options...
rayhall Posted June 28, 2008 Report Share Posted June 28, 2008 Dave, The skyline plugin ECU are in stock. Two of them were fitted to R32 cars in Canada yesterday. The MAF is not required and can be removed. Quote Link to comment Share on other sites More sharing options...
Guest Dave-Kriedeman Posted June 29, 2008 Report Share Posted June 29, 2008 Thanks Ray, Any word on how the R32s went. No timing jitters i bet. Are all make CAS chopper discs supported in the software on V44 & V88 models. For example standard Nissan, but also previously changed chopper discs that have been swappped out to trigger a lesser brand ECU. Thanks, Dave. Quote Link to comment Share on other sites More sharing options...
rayhall Posted June 29, 2008 Report Share Posted June 29, 2008 Dave, Cam at Lightspeed installed four of the Nissan plug-in over the weekend. There were no problems and everyone is happy. All the stock Nissan trigger disks are supported and you do not have to add diodes as the Vipec reads and uses all 360 slots. Quote Link to comment Share on other sites More sharing options...
Guest Dave-Kriedeman Posted June 30, 2008 Report Share Posted June 30, 2008 Excellent , thanks Ray. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.