Incognito G Posted July 27, 2009 Report Share Posted July 27, 2009 Hi Everyone, Having wired AUX 5+6 to Coil A and AUX 7+8 to Coil B and have the two red wires of the ISC to +12V, the Stepper seem not to work. I used to run a Haltech E8 and it only makes use of 4 wires to the coils without a +12V, anyway I can do this with the Storm? I tried doing Close Loop and Open Loop manually changing the steps, none seem to work Anything I am missing? Quote Link to comment Share on other sites More sharing options...
Simon Posted July 31, 2009 Report Share Posted July 31, 2009 The stepper should do a reset at either key on or off depending on settings. If it doesn't move then I would be rechecking the coil pairings. I'm also assuming that you have selected ISC stepper on all 4 drives. Quote Link to comment Share on other sites More sharing options...
Incognito G Posted July 31, 2009 Author Report Share Posted July 31, 2009 Thanks Simon. I will try redoing the pairing. I did set the Aux 5 to 8 as ISC Stepper in PC Link. The pairings previously worked on a Haltech though Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.