Kuuno Posted September 3, 2014 Report Share Posted September 3, 2014 hi i have a setup w link g4+, dash2 and dl1 club logger i want the logger to get its adata from link over can. Firstly do i need a unlock feature for this? I have the can cable but im getting confused by the can feature unlock for obd stream and then is there a preconfigured settings file for the race technology logger to import into link? thanks alot! Quote Link to comment Share on other sites More sharing options...
Simon Posted September 4, 2014 Report Share Posted September 4, 2014 Hi No you will not need to unlock OBD. The ECU can output a pre defined stream that was developed to suit the Dash2pro. If you turn the CAN on and select the Dash2pro data stream this should allow comunication to the logger. Quote Link to comment Share on other sites More sharing options...
Kuuno Posted September 8, 2014 Author Report Share Posted September 8, 2014 thanks! Â i have done this and selected the dash2pro data stream, do i have to do enything else? currently my setup looks like this(pic) Â if i look at the stream stab i dont see eanything there, is this correct? Quote Link to comment Share on other sites More sharing options...
Simon Posted September 9, 2014 Report Share Posted September 9, 2014 ECU wise that is all you need to do. Then it comes down to the CAN wiring to the dash and the dash firmware and set up. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.