Jump to content

Ability to log G-Force


Guest grant620

Recommended Posts

Guest grant620

Hi,

I've got some G-sensors going into my G4 for logging G-force both laterally and under braking etc.

Problem is, the only way to allow a negative number is to use the cal table set up to temperature!

So I've got the input set as a "GP Input" tied to a CAL Table using deg C, set to -25 to +25 with a multiplier to show -2.5 to +2.5.

It would be great if an option was "G Force" in the "Output Units" section of a CAL table, and for that number to be allowed to range from, say, minus 3 to plus 3.

What do you think?

Cheers, Grant

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...