Jump to content
Sign in to follow this  
ken1436215443

RPM Limit with Ignition cut HELP!

Recommended Posts

Previously ken wrote: anyone?

I want to set so that my link G4 extreme ecu cut my rpm limit that create pop and bang. Right now it on ign cut not in advance mode but no pop or bang sound like fuel cut.

Share this post


Link to post
Share on other sites

You will need to play with the percentage cut. I would suggest a max cut around 80-90%

It will take some experimenting to find what works.

Share this post


Link to post
Share on other sites

right now this is the setting

hard limit  ign 100%

adaptive

limit control 200 rpm

hard limit act 200 rpm

end cut 90%

start cut tp 100% 60%

start cut low tp 30%

tp low 15%

decay 1% 20 ms

ign trim -15

what would you suggest changing?

Share this post


Link to post
Share on other sites

Maybe try a lower end cut %. try 80%

You want it to be cutting but not reaching the 100% cut of the hard limit. As you need some ignition events happening to ignite the un-burnt fuel.

Share this post


Link to post
Share on other sites

In some cases you might not be able to get this effect. It could be a function of the engine / exhaust.

To get the bangs you need the right amount of air fuel mix and enough heat to ignite it in the exhaust.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...