Guest |114| Posted December 7, 2008 Report Share Posted December 7, 2008 After the success of the Vi-PEC install into my Honda City I am now doing a RX7s1 13B bridge port racecar with Scott@Insightmotorsports as our next test bed for developing our range or Rotary engine products,a list on the car below Race Torque built 13B bridge port engine (for now till our own in house built engine is finished) Phil Laird 4 throttle intake manifold (highly modified by us now) V88 Vi-PEC using 2 EGT sensors with controller,2 knock sensors,Tech-Edge dual lamda controller & gearcut strain gauge Vi-PEC 4 channel CDI with Mercury Coils So far we have made great part throttle gains with the Vi-PEC over the old ECU setup and it has allowed us to play more with intake manifold design and the engine sounds very different now, again I cannot thank Scott from Insight Motorsports enough for his knowledge & input and to Ray Hall for the late night e-mails with great tech support,I will keep the thread updated as we get more involved with developments. Regards Dave Quote Link to comment Share on other sites More sharing options...
Guest Marcel B Posted December 17, 2008 Report Share Posted December 17, 2008 Any Pics :?: Quote Link to comment Share on other sites More sharing options...
Guest |114| Posted January 13, 2010 Report Share Posted January 13, 2010 More on this setup soon after months of playing around we will finally be back on the dyno within the next couple of days to get the engine ready for a run in the IPRA support race for the Bathurst 12hr race meeting early next month in our 2nd team car. Quote Link to comment Share on other sites More sharing options...
Guest |114| Posted August 18, 2010 Report Share Posted August 18, 2010 After many set backs we finally got to race our RX7 and it as the first ever meeting for owner/driver Ray Bell,more will be posted about dyno and race results over the next few days we are very happy with both and cant wait to get more development time on both the dyno and track over the next few months.Pic is here http://www.ipraforum.com.au/viewtopic.p ... 4&start=15 car 21 Race Results http://www.natsoft.com.au/cgi-bin/resul ... 10.WAKE.P7 http://www.natsoft.com.au/cgi-bin/resul ... 0.WAKE.E14 http://www.natsoft.com.au/cgi-bin/resul ... 0.WAKE.E21 http://www.natsoft.com.au/cgi-bin/resul ... 0.WAKE.E28 Cars 119 and 4 where not in our class and running slicks we run on a control R compound tire We cant thank Vi-PEC and Insight Motorsports enough the car did not miss a beat all weekend we just need to sort out a few chassis setup issues and then we will be able to use the power our engine is making. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.