Jump to content
Sign in to follow this  
Eric

Gear Change Help

Recommended Posts

I need to set a sort of a limiter on my gear change but I would like to trigger it but my self using a switch which I have on my shifter. It is the Gear Cut control? Can you please help me with the configuration. My shifting point should be somewhere  about 9000rpm.

Thanks in advance for you help.

Eric

Share this post


Link to post
Share on other sites

Hi Eric,

Yes, I think you should use the gear-cut control function.

  • Set the control channel up to be the DI which you have your switch connected to. 
  • Activation point > (RPM) This is up to you, but as you shift somewhere about 9000 rpm, setting this at 8800 could be a sensible number.
  • Activation point > (TP) Again, this is up to you, but maybe somewhere around 80%?
  • Cut Level This is going to take some experimentation to find what works best for your setup. 90% is quite common and would be a good starting point.

Most of the other settings are ones you are going to have to play with to work out what is best. If you right click on a function and select 'Whats this' you should get linked through to the relevant help section. If you have any specific questions feel free to ask.

Cheers,

Scott

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...