Fletcher Campbell Posted August 24, 2007 Report Share Posted August 24, 2007 I am in the process of building a gts4 with mostly gtr running gear and gts4 electrics. I have a linkplus v14 ecu. The factory 4wd computer has 2 inputs (possibly 3) from the factory ecu, for throttle position . Did the old gtr link have an output for this? Is there an output on the linkplus? Or should i hook the tps in parallel to the link and 4wd tps inputs? Any help would be appreciated. Thanks Quote Link to comment Share on other sites More sharing options...
Fletcher Campbell Posted August 24, 2007 Author Report Share Posted August 24, 2007 I found this post about the same problem. http://www.linkecu.com/forum/forums/lem/831094775 Can i buy the bit that outputs the signal and solder it in to my loom? thanks Quote Link to comment Share on other sites More sharing options...
ashesman Posted August 28, 2007 Report Share Posted August 28, 2007 You cant buy the bit that outputs the signal. the LinkPlus has no output for this. The old GTRLink and the current AdaptaLinks output a scaled down version of the TPS signal to the 4wd controller. I have heard of other guys just T'ing off the TPS signal to the 4WD ECU as you said without any other problems. I have no idea what the other signals to the 4WD controller you mentioned are... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.