Incognito G Posted June 30, 2009 Report Share Posted June 30, 2009 Hi Everyone, I am preparing to install the Link Storm and it notes that the Stepper Motor (4 Wire) should be wired using Aux 1 to 6. However, in the software, I don't see anything indicating what the aux wires should be. Stepper Motors usually have a coil a (neg and pos) and a coil b (neg and pos), how will the link know which is which? Thanks! Quote Link to comment Share on other sites More sharing options...
Guest Dave Posted June 30, 2009 Report Share Posted June 30, 2009 Stepper motor should be controlled off Aux 5 to 8 aux 5&6 go to one coil winding and aux 7&8 go to the other regards Dave [email protected] Quote Link to comment Share on other sites More sharing options...
Incognito G Posted June 30, 2009 Author Report Share Posted June 30, 2009 Thanks Dave. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.