Jump to content

Trigger setup, Missing tooth / cam sync.


Jan Lassen

Recommended Posts

If I will use a setup with missing tooth and cam sync set to 'sync level' I will need a cam trigger wheel with a 180 deg. tooth .

The questions is.

1 how many camshaft deg. should the trigger be high / low

2 where do the trigger have change level, exactly at TDC or with in a crank teeth, or something else..

This setup is for a custom setup with no use of factory triggers / sensors

Jan

Link to comment
Share on other sites

question 1 you have answered your self 'I will need a cam trigger wheel with a 180 deg. tooth .' the trigger does not need to change anywhere special the principal of this setup is that the cam level will be high when the missing tooth on the crank is present on one revolution, on the next revolution with the missing tooth present the cam will be low so as long as you have the missing tooth aligned in the middle of the high lobe of the cam trigger you will be ok Regards Dave [email protected]

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...