Laurence Koelmeyer Posted May 11, 2008 Report Share Posted May 11, 2008 Hi there I have a 3SGE engine connected to a LEM G3, how to I go about setting up the values on the LEM I see there is a sample .pcl file, does any one have a .pcl file suitable for this engine or make some suggestion for vaules. I don't want to blow the engine on first attempt to start it. Thanks Laurence Quote Link to comment Share on other sites More sharing options...
Laurence Koelmeyer Posted May 12, 2008 Author Report Share Posted May 12, 2008 Which base map should I use for a na Toyota 3SGE Quote Link to comment Share on other sites More sharing options...
Simon Posted May 15, 2008 Report Share Posted May 15, 2008 If you are lucky the MX5 one might be close at least as a starting point for fuel and ignition. Don't copy over the full PCL file only import the Fuel and ignition. You will need to manually configure all the inputs and outputs. I think thats the only NA map that we have. You will then have to adjust to suit from there. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.