Guest |261| Posted February 1, 2009 Report Share Posted February 1, 2009 I have setup flat shift in my car using DI5 and the factory clutch switch (which is triggered to ground) (nissan GTS plugin), but when you try to use the flat shift there is a 1-2 second delay before the ecu will actually do the ignition cut by which time you have already changed gears and are trying to continue accelerating. Any ideas? Quote Link to comment Share on other sites More sharing options...
rayhall Posted February 1, 2009 Report Share Posted February 1, 2009 The lower the Digital input number the more often it is looked at. The 1-2 seconds is excessive. I will look into this and reply back. Ray. Quote Link to comment Share on other sites More sharing options...
Guest |261| Posted February 1, 2009 Report Share Posted February 1, 2009 Thanks. Quote Link to comment Share on other sites More sharing options...
Guest |261| Posted February 2, 2009 Report Share Posted February 2, 2009 Ray, I went back through my DI settings and realised at some point i must have bumped the laptop as the active edge setting had been changed to falling instead of rising. The flat shifting is now working as it should be. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.