Jump to content

minimum effective injector pulse width


RH9 GTR

Recommended Posts

Can any one explain what minimum effective injector p.w is  in MAIN FUEL setup ? is it the p.w at 15 volts  ? or it is some thing else ?

 

Why do i need to mention it in the MAIN FUEL setup ? i have stock 560 cc/min injectors for jdm evo 8 . What value will be considered as good 1.00 ms 2.00 ms or 3 for a good idle ? i dont have injector calibration data . i noticed that in the older firmware this option was not present. 

Is minimum effective inj pulse width is different for different injectors ? i.e low impedance  and high impedance .  Bigger and smaller injectors ?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...