Guest |269| Posted February 9, 2009 Report Share Posted February 9, 2009 I've searched high and low (or perhaps not enough) for a particular feature of the Vi-PEC V88 ecu, but I've come short handed. Does the V88 have the capability to create individual fuel maps? Or at the very least, does it have a compensation feature per cylinder? Much appreciated, Thanks. Quote Link to comment Share on other sites More sharing options...
Guest |99| Posted February 9, 2009 Report Share Posted February 9, 2009 Individual cylinder fuel trimming can be found under the "Advanced Fuel" heading. You can then either trim each individual cylinder by either a fixed amount or via a table. You can't use both though. Hope this helps. Quote Link to comment Share on other sites More sharing options...
rayhall Posted February 9, 2009 Report Share Posted February 9, 2009 Does the V88 have the capability to create individual fuel maps? You will also find under advanced the option to have dual fuel table. The same for ignition. Ray. Quote Link to comment Share on other sites More sharing options...
Guest |126| Posted February 17, 2009 Report Share Posted February 17, 2009 There is also the availabilty of using the 4d and 5d maps, digitaly triggering them for applications such as water meth, nitrous etc. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.