Jump to content
Sign in to follow this  
Carlos Cordoba

Trying to wire in a knockblock to the G3 using G4 Firmware

Recommended Posts


Just be aware that a G3 with G4 firmware means your pin out and some stuff changes slightly.

What was ANload 1,2, 3 in the G3 - Becomes ANvolt 1, 2, 3 on the G4 Firmware.  And what was ANvolt 1, 2, 3 in G3 - Now becomes ANvolt 4, 5, 6.  This means to make use of the wideband signal as you have set it up on ANvolt 4, you need to wire it to the original ANvolt 1 on a G3 pin out, and to use your ANvolt 5 if it's spare, wire it to the original ANvolt2.

I know this sounds confusing, but once you wrap your head around that you'll be away.  Make sense?


Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Create New...