Jump to content

Cam Sensor


Guest |252|

Recommended Posts

I am working on getting the V44 setup for our Honda CBR600F4i sportsbike engine for our student project race car.

The crank angle sensor has 12 teeth and the cam angle sensor has 3 teeth (see attached picture). From my understanding, the cam sensor is used as the sync pulse and should pulse once per 2 crankshaft revolutions at TDC. Is there any way to setup the ECU for the 3 toothed cam sensor? It would be nice to avoid having to cut off 2 teeth.

Thanks,

Brian

Link to comment
Share on other sites

  • 3 weeks later...
Guest |252|

Excellent. Would it be possible to get this feature added to list? It will be handy to have for next years car build to avoid any slight cam unbalancing.

Thanks,

Brian

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...