Eirik veka Posted July 9, 2013 Report Share Posted July 9, 2013 Hey. Help me pleace, has serious problem.  Have asked and searched around without result, is a bit desperat. so I hope som one can help me. Have an s13 with RB25DET Generation 2, with: Eagle rods CP piston Tomei poncams 80mm throttle body aftermarket intake ported Garret GT3540r .82 ar Split Fire Ignition coils Link G3 ECU 1.2 mm head gasket Denso 850cc injectors Aeromotive A1000 fuel pump Apexi avcr 52mm wastegate adjustable cam gears. Have run it on the dynapack, but it seems to leen out between 3700-4000, notthing is registrated in the link g3, it is the same problem when standing still so when I drive the car? Any settings that are wrong? how much boost pressure can I run on this setup? Thanks Quote Link to comment Share on other sites More sharing options...
Simon Posted July 10, 2013 Report Share Posted July 10, 2013 Do you have a LinkPlus G3 or is it the LEM G3. The LEM is limited to 2.5 bar or it might be 7 bar if it had an upgrade. When the motor leans out is this being measured with a wideband sensor or is it just by feel? If you are seeing the AFR's leaning out on a wideband and you are trying to add more fuel with the ECU but not seeing an increase in fuel you need to look at all areas that can effect fuel supply. Pump Injectors Regulator Fuel rails etc Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.