Michael ohrstrom Posted February 7, 2008 Report Share Posted February 7, 2008 Hi i have a fev qestions about knock link can a use a sensor from a stock car ? is the red cable + black/brown system - and the 2 black sensor ? /micke Quote Link to comment Share on other sites More sharing options...
ashesman Posted February 7, 2008 Report Share Posted February 7, 2008 Red = +12V Switched Black = gnd Black = sensor gnd Brown/Black = sensor signal Most factory sensors can be used without a problem... Quote Link to comment Share on other sites More sharing options...
francisco jose da silva pinto Posted April 20, 2008 Report Share Posted April 20, 2008 help hello hi by lanbada link my car is subaru 98 My probe has 3 wires 2 whites and one near as the lanbada link to my car may give some assistance Ja called a ves but even with the car turned off dame the number 9 when ligo dame senpre the number 9 can help me called a ves but even with the car turned off dame the number 9 when ligo dame senpre the number 9 can help me Quote Link to comment Share on other sites More sharing options...
Simon Posted April 21, 2008 Report Share Posted April 21, 2008 This should help.. Quote Link to comment Share on other sites More sharing options...
Simon Posted April 21, 2008 Report Share Posted April 21, 2008 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.