Guest |229| Posted February 22, 2009 Report Share Posted February 22, 2009 Im setting up the narrowband lambda now. have cahnged the AN channel used from AN 1, to AN 6. (it was default AN 1) I think this is correct, as the std lambda is connected to AN 6?? (RB25DET engine..) I just want to get this confirmed? Quote Link to comment Share on other sites More sharing options...
rayhall Posted February 22, 2009 Report Share Posted February 22, 2009 Volt 6 (Pin 29) is where the factory 02 sensor input is connected. Select this as narrow band and you can use the narrow band closed loop control. Ray. Quote Link to comment Share on other sites More sharing options...
Guest |229| Posted February 23, 2009 Report Share Posted February 23, 2009 Hi sir. under Analog channel. AN volt 6 is set to "NB oxy". This is correct. under fuel - closed lambda. I have selected AN channel: 6 (it was 1 as default) <-- Its this i just want to be confirmed in. Quote Link to comment Share on other sites More sharing options...
rayhall Posted February 23, 2009 Report Share Posted February 23, 2009 Yes that is correct. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.