yoman Posted April 13, 2011 Report Share Posted April 13, 2011 I have a aftermarket 90mm throttle body in my evo 3. I have a nissan TPS as thats what reqiured to use, Can any one help me with wiring it into my evo 3 TPS loom? Ive searched but no luck so far, Cheers guys. Quote Link to comment Share on other sites More sharing options...
Simon Posted April 14, 2011 Report Share Posted April 14, 2011 Hi You will need to determine the 5v and ground pins. These will have the biggest resistance between them and the resistance will not change when the sensor is turned. The remaining pin will be the signal. If the TPS reading goes in the wrong direction just swap the 5V and ground. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.